xtc/docs/BUILTIN_DEVICES.md

# Internal Instruments and Effects

No plugin downloads, search paths or external libraries are needed. The original
built-in sine remains available for existing projects.

Choose **Internal: Soft Keys** or **Internal: Sub Bass** in a MIDI track's
instrument dropdown. Soft Keys blends a sine with a third harmonic; Sub Bass
uses a pure sine. Both have 32 voices, velocity sensitivity, short
attack/release envelopes, sustain pedal, note-off and panic handling. High
harmonics are omitted near Nyquist. The default sounds remain compatible with
fixed presets from v13. See the instrument controls below. A sample library is
not provided by these oscillators.

In **Modular Graph**, select a wire and choose **Edit → Insert internal delay on
wire** or **Insert internal reverb on wire**. This preserves the route and
inserts the effect into the signal path. **File → Add internal delay/reverb**
creates an unconnected device for manual wiring. Select its node and use **Edit
→ Selected plugin control** to edit it, or **Selected plugin automation** to
automate it. Changes use the existing stopped-engine preparation and undo
workflow.

- **Delay:** time (1–2000 ms), feedback (0–0.95), dry/wet mix (0–1).
- **Reverb:** four parallel damped feedback combs, with decay (0–0.95), damping
  (0–0.95) and dry/wet mix (0–1). Decay is a feedback coefficient, not seconds.

These are basic mono processors; stereo plans use independent instances. Reverb
is deliberately simple and has no room model or stereo diffusion. Delay time
changes can click; these original devices have no crossfade or tempo sync.
Internal effect history resets on transport discontinuities. Configurable export
tails and optional playback stopping after tails are described below.

Project format 13 stores internal devices as format 4 with reserved module path
`/xtc/internal`, stable numeric identity and index (0 keys, 1 bass, 2 delay, 3
reverb). This is a virtual identifier, never an external binary. Effect controls
and automation are saved using the existing plugin records; instruments are
fixed presets. Readers still accept formats 1–12. Older xtc builds reject format
13. All buffers are allocated during preparation; processing performs no
allocation, file access, library loading, locking or GUI calls.

Validation:
`make BUILD_DIR=build/builtins all gui test test-gui-instruments test-gui-modern-plugins test-gui-plugins analyze`
(join onto one line). `test-builtins` checks impulse tails, dry mix, feedback
bounds, block partition consistency, note release/panic and instrument/effect
project round trips.

---

## Acceptance Checks

`make BUILD_DIR=build/builtin-acceptance all gui test test-reliability test-gui builtin-preview`
checks all four device identities and GUI paths without external plugin
binaries. The reliability runner fails each internal preparation allocation in
turn and forbids allocation/free, direct file I/O and blocking locks during
processing. Core tests compare persisted rendering for both instruments and both
automated effects, corrupt an internal module identity transactionally, and
cover voice exhaustion, sustain, repeated notes, partitioning and transport
reset/seek/panic. The existing portability suite verifies older project
migrations.

For repeatable manual listening, run `make builtin-preview` and audition
`build/builtin-{0,1,2,3}.wav` at a conservative level: 0 is Soft Keys, 1 Sub
Bass, 2 Delay and 3 Reverb. Each six-second file includes held tones or two
impulses followed by silence for tails. Check onset/release, unwanted
discontinuities, finite decay and the documented mono character. Generation is
verified; human listening and physical-device qualification remain pending.

---

## Instrument Controls and Presets

**Edit → Selected instrument controls** edits an assigned internal instrument.
The five ports are harmonic amount (0..1), attack (0.1..2000 ms), release
(1..5000 ms), low-pass cutoff (20..24000 Hz; 24000 bypasses the filter) and
pitch-bend range (0..24 semitones, default 2). The harmonic is a third harmonic;
it is suppressed before crossing Nyquist. Attack/release are exponential time
constants, not times to absolute silence. Defaults preserve the original sounds.

**Selected instrument automation** accepts `port tick mode value`, with absolute
project ticks, linear mode 0, hold mode 1, or -1 to remove a point. Automation
uses absolute sample positions, including seeks and 256-frame instrument chunks.
Static edits stop/reprepare playback and are undoable. Existing v13 assignments
with no parameters upgrade to defaults when opened in the editor.

**File → Save/Load instrument preset** uses an explicit absolute path. Presets
are versioned single-instrument `.xtc` containers with no clips. Public C APIs
`xtc_plugin_preset_save/load` provide atomic saving and transactional metadata
loading; they never execute plugin code. Loading into a track is an undoable,
prepared edit. Parameter automation is included. Preset paths are ordinary
files; saving uses the existing project replacement semantics.

Live MIDI pitch bend uses standard 14-bit messages (8192 center) and is applied
at the event's sample offset per channel. Panic clears the affected channel's
bend and sustain. The original unassigned sine ignores bend; CLAP MIDI/VST2
receive raw bend, while native-note CLAP/VST3 do not yet map it to expressions.
No external-plugin parameter support is implied.

Format 14 adds instrument controls and automation. Readers still accept v1–v13;
old fixed internal assignments use their original defaults. Older builds reject
v14. Tests cover legacy-default sound equality, v13 migration, parameter/preset
round trips, pitch-bend offsets, automated block partitions, undo and GUI edits.

---

## Sample Instrument

**File → Load sampler WAV** assigns a Sample Player to the selected track or
relinks its existing sample while retaining its controls. Use the instrument
controls editor for root MIDI key (0..127), whole-sample loop (0/1), attack,
release and gain (0..4). One root mapping covers every MIDI key using linear
rate conversion, including source/output sample-rate differences. Loop and root
are integer controls and require hold automation. Live bend spans ±2 semitones.
This initial sampler has no multisample zones, loop-point editor or time
stretch. Extreme transposition can alias; use appropriate source material.

The existing WAV reader supports PCM16/24/32 and float32, mono/stereo downmixed
to mono. Each sample is at most 16M mono frames; the combined instrument plan
budget is 64M frames (256 MiB). Files are at most 256 MiB, with 4096 chunks.
There are 32 preallocated voices per track. Loading and freeing happen only on
the control thread; playback interpolates cached samples without I/O.

Missing/invalid samples retain their references and play silence, reported in
backend asset-issue counts, GUI preparation warnings and `xtc-check --inspect`.
Relink with Load sampler WAV; it is one undoable prepared edit. Allocation and
capacity failures reject preparation. Format 15 adds a SAMPLE reference after
each instrument's controls/automation; in-project samples save relatively and
resolve relative to the project file. Other samples retain absolute paths.
Preset files include the reference but do not embed/copy audio.

`examples/projects/original-pluck.wav` is an original synthesized example with
license/provenance in SAMPLE_LICENSE.md. Both are installed with the examples.
Tests cover source-rate conversion, one-shot endpoint, looping, release,
partitioning, preset references, missing assets, GUI relinking/undo/reload and
preparation-allocation/callback guards.

---

## Stereo Effects

**File → Add stereo delay/reverb** and **Edit → Insert stereo delay/reverb on
wire** add new devices (indices 5/6). Original Delay/Reverb (indices 2/3) retain
their original algorithms, values and saved identities. Existing control and
automation editors, undo and persistence support both generations.

Stereo Delay adds integer **Sync**: 0 milliseconds, 1 quarter, 2 eighth, 3
dotted eighth, 4 eighth triplet. Nonzero sync follows project tempo; changing
tempo uses ordinary stopped project preparation. Time changes crossfade two
fractional read heads for 5 ms. A crossfade finishes before adopting the latest
automated target, bounding transition work and avoiding read-head jumps.
Feedback cross-couples channels (80% same, 20% opposite), with a 0.95 bound.
Delay storage covers four seconds, sufficient for all divisions at 20..300 BPM.

Stereo Reverb adds **Room** (0..1, scales comb spacing) and **Diffusion** (0..1,
cross-couples damped feedback). The right comb timings differ from the left.
Decay/damping retain 0..0.95 bounds. This is a simple algorithmic reverb,
without physical room simulation or a measured RT60. Room automation can alter
coloration.

The graph evaluates both channels' inputs before calling a coupled internal
processor. Each stereo device has one prepared state, with no callback
allocation. Mono processing excites both sides and folds the wet output to mono.
External plugins and the original effects retain independent mono instances.

Tests compare whole/split blocks, tempo-synced impulse placement, left-to-right
energy, bounded extreme feedback/diffusion and graph/direct stereo output
(including the engine's subnormal-to-zero policy). GUI tests save/reopen both
identities; callback guards and ASan/UBSan cover processing.
`make builtin-preview` also writes files 5/6 for repeatable listening; human
listening remains pending.

---

## History and Tails

Internal effects reset on a transport discontinuity (seek/loop wrap), stopped
backend, or newly prepared plan. Pause uses backend Stop and therefore also
resets history. Continuous playback retains tails. Reset invalidates delay
history with a valid-frame counter and clears only fixed-size filter/voice
state; it neither allocates nor clears a large delay buffer in the callback.
External plugins retain their existing history contract. MIDI discontinuities
continue to chase notes with fresh envelopes.

**File → Export WAV** renders the song plus the Preferences / transport
`tail_ms` duration (0..60000, default 3000). Output is stereo float32 WAV at the
offline sample rate. The destination must be a new absolute path. Rendering
prepares an independent snapshot, then advances in 256-frame control-thread
steps with a Cancel button; the project and playback instance stay independent.
Only a complete synced file is published, without replacing an existing file.
Cancellation/errors remove the temporary. Missing media rejects export. RIFF's
32-bit size limit is enforced before rendering. Rendering does not apply loop
preferences, normalize, automatically detect silence or stop infinite
oscillator/feedback sources early: the configured endpoint always bounds work.

The public `xtc_export_create/step/progress/destroy` API supports incremental
rendering and cancellation by destruction. A failed step must be followed by
destruction. `xtc_project_render_length` returns the exact sample endpoint.

Set `stop_after_tail=1` in Preferences to stop ordinary playback after the song
and configured tail. Looping and recording disable this automatic stop. Playback
stop is serviced by the GUI refresh timer and normal stop fade, so it can exceed
the endpoint by a refresh interval plus fade; export has the exact sample
length. Uncheck the setting to retain indefinite playback. Stop always remains
available.

Tests compare stereo export against direct rendering in 31-frame blocks, verify
nonzero tails, exact length, cancellation, existing-file retention, tail bounds,
history reset and callback-safe reset. Preview generation and manual listening
procedures remain available; no human listening result is claimed.