xtc/docs/USER_MANUAL.md

# xtc user manual (0.1.0 development build)

xtc is a bounded Linux music-making prototype. Start with a copy of an important
project and keep backups of its WAV media. Supported limits and unfinished areas
are listed in KNOWN_LIMITATIONS.md; no production/device qualification is implied.

## Build or install

Follow BUILD.md and LINUX.md. Core: `make all test`; GUI: `make gui`, then
`./build/xtc`. Use an existing JACK-compatible server and reconnect with F6.
Connect `midi_in` to a controller, `input` to mono capture and `output` /
`output_right` to left/right playback using your JACK routing application.
No server, physical routing or system configuration is changed automatically.
`xtc --version`, `xtc --help` and `xtc --diagnose` need no display/server.

For a source install stage with `make install-gui DESTDIR="$PWD/build/stage"
PREFIX=/usr`, inspect the stage, and use your normal deployment process. A user
prefix is supported (for example an absolute path to your `.local` folder).
`make uninstall` with the same DESTDIR/PREFIX removes only that version's known
files. See LINUX.md for package extraction, dependencies and removal. Never use
a release built for a different system ABI without rebuilding/testing it.

## Make a short project

1. New/Open starts in Sequencer. Add track; use F2 to name it.
2. Add MIDI clip, select it and open Piano roll (Ctrl+4). Left-click to draw
   notes, drag to move, drag a right edge to resize, Delete/right-click to remove.
3. Alternatively Import WAV (Ctrl+I). It creates/routes an Audio clips source;
   supported WAV formats and preload limits are in AUDIO_FILES.md.
4. Drag clips to arrange them and edges to trim. View/Snap sets the timeline
   grid; +/- zoom buttons and scrollbars navigate. Ctrl+D duplicates a clip after
   its end, retaining its complete source. F2 names clips; right-click offers
   duplicate/rename/delete. Alt+Up/Down with timeline focus reorders tracks.
5. Play/F5 starts; Pause/F7 or Stop/F8 leaves the position for resuming. Home
   returns to start while stopped (or stops first); click the ruler to seek.
   Recording uses Stop, not Pause. F9 Panic releases the instrument.
6. Mixer (Ctrl+2) offers track gain/pan/mute/solo and Gain/Pan automation lanes.
   Click to add points, right-click to remove. CONTROL.md explains timing and
   live CC7 volume, CC10 pan and CC64 sustain.
7. Save (Ctrl+S), close, reopen and continue editing. Ctrl+Z undoes and
   Ctrl+Shift+Z/Ctrl+Y redoes. New/Open resets history after unsaved-change handling.

Modular Graph (Ctrl+3) exposes routing. Drag output to input to connect, select a
wire/node and Delete to remove; cycles and invalid ports are rejected. Keep an
Output route for playback. GUI changes show queued/active graph status. Graph
positions are session-only; music/routing/automation are saved. Edits that prepare
new plans stop playback; disk/compilation may pause the GUI, never run in audio.

## Record and retain media

Choose a project folder and save the project there first. Record/Shift+F5 asks for
an unused WAV path. Stop finalizes the take and inserts it. Existing destinations
are protected, including a file created while recording. Undo/removing a take
removes its reference, never the recorded file. Imported external files are also
never deleted. WAVs inside the save folder become relative references; move the
folder and media together. Save As preserves the same source media, not a copy.

On write failure the GUI reports a retained path. Keep it and recover complete
frames to a different, unused destination:

```sh
xtc-check --recover-recording take.wav.tmp.XXXXXX recovered.wav
```

Only xtc's canonical float32 mono temporary format is salvaged. Incomplete trailing
frames are omitted. The source is retained. Import/relink the recovered WAV.
Missing/unreadable media is silent and reported; select the clip and use File/
Relink selected audio. See RECOVERY.md for interruption, disk-full and power-loss
limits. Close/project operations are refused while recording; finish the take first.

## Trusted effects and sources

File/Load LADSPA plugin lists compatible descriptor indices from the chosen `.so`.
Loading executes native code. Select a documented compatible mono plugin, connect
its graph ports, then use Edit/Selected plugin control. Edit/Selected plugin
automation adds/removes tick-based linear or step points. Control names/ranges
appear in the dialogs. Module identity/control values/lanes save with the project;
module binaries and DSP history do not. The initial amp/inverter/sine set and
unsupported layouts are listed in PLUGIN_HOSTING.md. Missing plugins reject GUI
Open with identity/path information and preserve the saved/current documents.
Restore the compatible module at that path and retry. Plugins are not sandboxed.

## Diagnose a problem

Run `xtc-check --diagnose` and capture the version, architecture, compiled features,
GUI error text and steps to reproduce. `xtc-check --validate song.xtc` checks
metadata without opening plugins/media; it does not certify playback resources.
Check JACK routing, sample rate/format and xrun/process status in the GUI. After
server loss/rate change stop/reconnect and retry. Keep the original project,
media and retained temporary files before recovery attempts.

A native plugin can crash/hang the process. There is no crash-isolation guarantee.
Use the operating system's core-dump/debugger tools if available; xtc does not
install signal handlers, change core limits or upload crash reports. Debugger/
core files may contain media paths and audio memory; share only what you intend.
Report bugs following MAINTENANCE.md, including whether the issue reproduces
without plugins. Physical listening and independent human install/usability
acceptance remain pending.

## MIDI composition

In Piano roll, use the Notes menu for grid (including triplets), channel/pitch
filters, velocity/channel, quantization, transposition and pattern repetition.
Click selects a single note; Ctrl+A selects all filtered notes. Ctrl+D repeats
that selection at a chosen spacing within the existing clip source. Up/Down
transposes by a semitone. Commands are undoable through the main Edit menu.
See [MIDI.md](MIDI.md#phase-21-composition-commands) for shortcuts, timing and limits.

## Audio clip tools

Select an audio clip, click the ruler at the desired cut while stopped, then
choose Edit / Split audio at cursor (S with timeline focus). Ctrl+D duplicates;
Delete removes the clip reference. Drag the body to move and edges to trim.
Edit / Audio clip gain and fades (A) sets linear gain and fade durations in ticks.
All are undoable and preserve the WAV file. Waveforms show cached raw source
peaks, before gain/fades; large media can take time to load on Open/import.
See [AUDIO_FILES.md](AUDIO_FILES.md#phase-22-non-destructive-clip-editing) for
boundary behavior, preview limits and the deferred stretch/pitch tools.

## Inspecting and organizing routing

In Modular Graph, select a node or wire to inspect its routing in the feedback
line. Arrows show direction; yellow no-output badges identify disconnected
branches. L arranges nodes by signal flow. Select a wire and press I to insert a
unity gain/bus node as one undoable edit. These commands are also in View/Edit
and the graph context menu. Unwired effect inputs use external audio, as shown
by “ext in”; they do not imply silence. See [ROUTING.md](ROUTING.md).

Phase 24: Mixer also offers Add bus and a Route choice for ordinary tracks.
Select Track/Bus strips to edit their controls and automation. Master and selected
strip meters show dBFS with 20 dB/s release; Reset peaks clears latched clipping.
See MIXER.md for solo rules, gain staging and meter taps.

Phase 25: File → Load LADSPA plugin offers a descriptor browser. Select a graph
plugin and Edit → Selected plugin control for identity, values, ranges and
Reset defaults; Apply commits, Cancel discards. Edit also offers replacement,
reset and insertion of an effect on a selected wire. Graph wires determine
processing order; Delete removes a selected plugin and its wires. Changes are
undoable. Replacement keeps compatible audio wiring but resets plugin controls
and automation. See PLUGIN_HOSTING.md for supported formats and failure behavior.

Phase 26: Mixer Interpolation selects Linear or Hold for each point added or
replaced. Audio → MIDI controller mapping lists all channel bindings; enter
`channel volume_CC pan_CC sustain_CC` (channels 0..15, 128 disables, enabled CCs
must be distinct, 120/123 reserved). Maps are undoable and saved. Controllers
modify live sine voices; arranged track/bus/plugin automation takes precedence
over its static controls and is unaffected by those MIDI bindings. See CONTROL.md.

Phase 27: unavailable main-menu undo/redo actions are disabled, including while
recording. Piano roll has Edit/Undo/Redo shortcuts and a right-click note menu;
right-click no longer immediately deletes notes. Graph right-click targets the
node/wire under the pointer. Undo preserves surviving selections. Completed
takes add one undo step; undo removes references and keeps WAV files. See
EDITING.md for grouped commands, failure handling and keyboard/focus behavior.

Project troubleshooting: `xtc-check --validate PROJECT.xtc` reports metadata
errors with the expected record and syntax line. `xtc-check --inspect PROJECT.xtc`
lists resolved media/module paths and plugin identities without executing plugins
or starting JACK. Exit codes: 0 = valid metadata and available files, 2 = missing
or unreadable references, 1 = metadata/I/O error. File availability does not
certify WAV contents or plugin compatibility. See [PROJECT_FORMAT.md](PROJECT_FORMAT.md)
for the compatibility and relocation policy.

Phase 31: **File → Load plugin** supports LADSPA plus an initial Linux
CLAP/VST2/VST3 effect subset. Select the actual module binary (`.clap` or `.so`,
including a VST3 bundle's inner binary). Modern effects require one mono input
and output, float32 and zero latency; they use default configuration. Instruments,
modern parameter editing/automation, opaque state and custom editors are not
implemented. Projects now save v11 and read v1–v11. See PLUGIN_HOSTING.md for the
full contract and test/qualification limits.