hanez/Passkey
1
1
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Removed obselete old versions of Passkey

Browse source
This commit is contained in:
Johannes Findeisen 2023-08-08 01:15:58 +02:00
commit a27889ace9
2 changed files with 0 additions and 203 deletions
Download patch file Download diff file Expand all files Collapse all files

109
Digispark_Passkey3.ino
View file

@ -1,109 +0,0 @@
// Passkey for Arduino using the Digispark Rev.3 board.
// Copyright 2022 by Johannes Findeisen <you@hanez.org>
// Licensed under the terms of the MIT license.
// For using the Blinker library you have to install it from:
// https://github.com/MajenkoLibraries/Blinker
// Since the code is included in Passkey you easily can just copy
// Blinker/src/Blinker.cpp and Blinker/src/Blinker.h to the root of
// Passkey.
#include "Blinker.h"
#include "DigiKeyboard.h"
// The button pin
#define BUTTON_PIN 0
// The LED pin
#define LED_PIN 1
// The pause after last button press before executing a command
#define PAUSE 2000
// Local variables
unsigned long last;
unsigned int count;
// Create blinker object
Blinker blinker(LED_PIN);
// The list of available passwords
// The number and overall lenght of passwords depends
// because the memory of the digispark is very limited...
// I recommend to use a prefix you easily can remember
// for the password/passwords to make the passwords
// on the passkey unusable for others in case you've lost
// your passkey. E.g.: WhatAWonderfulWorld -> then press the button.
const char *passwords[] = {
// passwords[0]
"n0Emb871NAQPSIqBoldh8R7UDaNhncF7Pt60Amdo6GWdTdAPwVBi2A3KU8x8DTCRo6GWdTdXNn2wLh3SUbxVWQvFDVPtatDg",
// passwords[1]
"oaxt6e3lSgflOuJ3C6Q6sUb5gvmvI5IEPFku5fqcbxJljBOUblHIT121wCu",
// passwords[2]
"jUgKGBtiJ0iNN1Ok9vejrXNn2wLh3SUbxVWQvFDVPtat0OxJlKU8x8DTCRo6GWdTdAPwVBi2A3KUrTKQwjUgK",
// passwords[3]
"G57dFnXsPUnRq1eC1CjrGxpCjuiJFlDti54W6wBS9Ro6GWdTdAPwVBi2A3KU8x8KGBtiJ0iNN1Ok9vejrXNn2wLhH"
};
void setup() {
// Set button pin to be INPUT.
pinMode(BUTTON_PIN, INPUT);
// Set BUTTON_PIN pin to HIGH because the button is connected
// to GND when pressed and will go LOW
digitalWrite(BUTTON_PIN, HIGH);
// Set blink effect (ON, OFF) in milliseconds
blinker.setDelay(25, 9075);
blinker.start();
// Initialize HID
DigiKeyboard.delay(0);
DigiKeyboard.sendKeyStroke(0);
// Light up the LED for a second to show that passkey is ready
pinMode(LED_PIN, OUTPUT);
digitalWrite(LED_PIN, HIGH);
delay(1000);
digitalWrite(LED_PIN, LOW);
}
void loop() {
// Start LED blink effect
blinker.blink();
// Read button state
if (digitalRead(BUTTON_PIN) == LOW) {
// Button is pressed
count++;
digitalWrite(LED_PIN, HIGH);
// Wait until button is released
while (digitalRead(BUTTON_PIN) == LOW) {
delay(1);
}
// Set the last press timestamp
last = millis();
digitalWrite(LED_PIN, LOW);
}
// Wait PAUSE time before executing a command
if (count > 0 && (millis() - last) >= PAUSE) {
// The switch case is the number of button presses
switch (count) {
case 1:
DigiKeyboard.println(passwords[0]);
break;
case 2:
DigiKeyboard.println(passwords[1]);
break;
case 3:
DigiKeyboard.println(passwords[2]);
break;
case 5:
// You can use print instead of println if you don't want
// to hit enter automatically after inserting the password
DigiKeyboard.print(passwords[3]);
break;
default:
break;
}
// Reset the counter
count = 0;
}
}

94
Digispark_Passkey4.ino
View file

@ -1,94 +0,0 @@
// Passkey for Arduino using the Digispark Rev.3 board.
// Copyright 2022 by Johannes Findeisen <you@hanez.org>
// Licensed under the terms of the MIT license.
// Maybe I need to use HIGH instead of LOW for triggering and then I think I need a pullup resistor
// when using the LED pin as INPUT pin:
// https://electronics.stackexchange.com/questions/361944/digispark-pin-mode-input-pullup-reading-low-on-pin-1
// A pulldown resistor should maybe do the work too.
// I like the pulldown idea because the button is easier to connect on a breadboard with one less cable... ;)
// More info:
// https://arduino.stackexchange.com/questions/75473/using-the-led-pin-for-input
// http://thetoivonen.blogspot.com/2015/12/fixing-pin-p5-or-6-on-digispark-clones.html
// NOTE: I tested it when make triggering on HIGH without using a pullup resistor and it works. Need to set
// the pin to LOW in setup() though. No need to read LOW from that pin anymore and no resistor required... \o/
// I need to evaluate this pulldown-/up stuff a little more.
#include "DigiKeyboard.h"
// The button pin
#define BUTTON_PIN 1
// The pause after last button press before executing a command
#define PAUSE 2000
// Local variables
unsigned long last;
unsigned int count;
// The list of available passwords
// The number and overall lenght of passwords depends
// because the memory of the digispark is very limited...
// I recommend to use a prefix you easily can remember
// for the password/passwords to make the passwords
// on the passkey unusable for others in case you've lost
// your passkey. E.g.: WhatAWonderfulWorld -> then press the button.
const char *passwords[] = {
// passwords[0]
"n0Emb871NAQPSIqBoldh8R7UDaNhncF7Pt60Amdo6GWdTdAPwVBi2A3KU8x8DTCRo6GWdTdXNn2wLh3SUbxVWQvFDVPtatDg",
// passwords[1]
"oaxt6e3lSgflOuJ3C6Q6sUb5gvmvI5IEPFku5fqcbxJljBOUblHIT121wCu",
// passwords[2]
"jUgKGBtiJ0iNN1Ok9vejrXNn2wLh3SUbxVWQvFDVPtat0OxJlKU8x8DTCRo6GWdTdAPwVBi2A3KUrTKQwjUgK",
// passwords[3]
"G57dFnXsPUnRq1eC1CjrGxpCjuiJFlDti54W6wBS9Ro6GWdTdAPwVBi2A3KU8x8KGBtiJ0iNN1Ok9vejrXNn2wLhH"
};
void setup() {
// Set button pin to be INPUT.
pinMode(BUTTON_PIN, INPUT_PULLUP);
// Set BUTTON_PIN pin to LOW because the button is connected
// to VCC when pressed and will go HIGH.
digitalWrite(BUTTON_PIN, LOW);
// Initialize HID
DigiKeyboard.delay(0);
DigiKeyboard.sendKeyStroke(0);
}
void loop() {
// Read button state
if (digitalRead(BUTTON_PIN) == HIGH) {
// Button is pressed; increment count.
count++;
// Wait until button is released
while (digitalRead(BUTTON_PIN) == HIGH) {
delay(1);
}
// Set the last press timestamp
last = millis();
}
// Wait PAUSE time before executing a command
if (count > 0 && (millis() - last) >= PAUSE) {
// The switch case is the number of button presses
switch (count) {
case 1:
DigiKeyboard.println(passwords[0]);
break;
case 2:
DigiKeyboard.println(passwords[1]);
break;
case 3:
DigiKeyboard.println(passwords[2]);
break;
case 5:
// You can use print instead of println if you don't want
// to hit enter automatically after inserting the password
DigiKeyboard.print(passwords[3]);
break;
default:
break;
}
// Reset the counter
count = 0;
}
}