From a27889ace98feffe30fe44bd40d3b6d935a48d15 Mon Sep 17 00:00:00 2001 From: Johannes Findeisen Date: Tue, 8 Aug 2023 01:15:58 +0200 Subject: [PATCH] Removed obselete old versions of Passkey --- Digispark_Passkey3.ino | 109 ----------------------------------------- Digispark_Passkey4.ino | 94 ----------------------------------- 2 files changed, 203 deletions(-) delete mode 100644 Digispark_Passkey3.ino delete mode 100644 Digispark_Passkey4.ino diff --git a/Digispark_Passkey3.ino b/Digispark_Passkey3.ino deleted file mode 100644 index 0b2cd2e..0000000 --- a/Digispark_Passkey3.ino +++ /dev/null @@ -1,109 +0,0 @@ -// Passkey for Arduino using the Digispark Rev.3 board. -// Copyright 2022 by Johannes Findeisen -// Licensed under the terms of the MIT license. - -// For using the Blinker library you have to install it from: -// https://github.com/MajenkoLibraries/Blinker -// Since the code is included in Passkey you easily can just copy -// Blinker/src/Blinker.cpp and Blinker/src/Blinker.h to the root of -// Passkey. -#include "Blinker.h" -#include "DigiKeyboard.h" - -// The button pin -#define BUTTON_PIN 0 -// The LED pin -#define LED_PIN 1 -// The pause after last button press before executing a command -#define PAUSE 2000 - -// Local variables -unsigned long last; -unsigned int count; - -// Create blinker object -Blinker blinker(LED_PIN); - -// The list of available passwords -// The number and overall lenght of passwords depends -// because the memory of the digispark is very limited... -// I recommend to use a prefix you easily can remember -// for the password/passwords to make the passwords -// on the passkey unusable for others in case you've lost -// your passkey. E.g.: WhatAWonderfulWorld -> then press the button. -const char *passwords[] = { - // passwords[0] - "n0Emb871NAQPSIqBoldh8R7UDaNhncF7Pt60Amdo6GWdTdAPwVBi2A3KU8x8DTCRo6GWdTdXNn2wLh3SUbxVWQvFDVPtatDg", - // passwords[1] - "oaxt6e3lSgflOuJ3C6Q6sUb5gvmvI5IEPFku5fqcbxJljBOUblHIT121wCu", - // passwords[2] - "jUgKGBtiJ0iNN1Ok9vejrXNn2wLh3SUbxVWQvFDVPtat0OxJlKU8x8DTCRo6GWdTdAPwVBi2A3KUrTKQwjUgK", - // passwords[3] - "G57dFnXsPUnRq1eC1CjrGxpCjuiJFlDti54W6wBS9Ro6GWdTdAPwVBi2A3KU8x8KGBtiJ0iNN1Ok9vejrXNn2wLhH" -}; - -void setup() { - // Set button pin to be INPUT. - pinMode(BUTTON_PIN, INPUT); - // Set BUTTON_PIN pin to HIGH because the button is connected - // to GND when pressed and will go LOW - digitalWrite(BUTTON_PIN, HIGH); - - // Set blink effect (ON, OFF) in milliseconds - blinker.setDelay(25, 9075); - blinker.start(); - - // Initialize HID - DigiKeyboard.delay(0); - DigiKeyboard.sendKeyStroke(0); - - // Light up the LED for a second to show that passkey is ready - pinMode(LED_PIN, OUTPUT); - digitalWrite(LED_PIN, HIGH); - delay(1000); - digitalWrite(LED_PIN, LOW); -} - -void loop() { - // Start LED blink effect - blinker.blink(); - - // Read button state - if (digitalRead(BUTTON_PIN) == LOW) { - // Button is pressed - count++; - digitalWrite(LED_PIN, HIGH); - // Wait until button is released - while (digitalRead(BUTTON_PIN) == LOW) { - delay(1); - } - // Set the last press timestamp - last = millis(); - digitalWrite(LED_PIN, LOW); - } - - // Wait PAUSE time before executing a command - if (count > 0 && (millis() - last) >= PAUSE) { - // The switch case is the number of button presses - switch (count) { - case 1: - DigiKeyboard.println(passwords[0]); - break; - case 2: - DigiKeyboard.println(passwords[1]); - break; - case 3: - DigiKeyboard.println(passwords[2]); - break; - case 5: - // You can use print instead of println if you don't want - // to hit enter automatically after inserting the password - DigiKeyboard.print(passwords[3]); - break; - default: - break; - } - // Reset the counter - count = 0; - } -} diff --git a/Digispark_Passkey4.ino b/Digispark_Passkey4.ino deleted file mode 100644 index cf15266..0000000 --- a/Digispark_Passkey4.ino +++ /dev/null @@ -1,94 +0,0 @@ -// Passkey for Arduino using the Digispark Rev.3 board. -// Copyright 2022 by Johannes Findeisen -// Licensed under the terms of the MIT license. - -// Maybe I need to use HIGH instead of LOW for triggering and then I think I need a pullup resistor -// when using the LED pin as INPUT pin: -// https://electronics.stackexchange.com/questions/361944/digispark-pin-mode-input-pullup-reading-low-on-pin-1 -// A pulldown resistor should maybe do the work too. -// I like the pulldown idea because the button is easier to connect on a breadboard with one less cable... ;) - -// More info: -// https://arduino.stackexchange.com/questions/75473/using-the-led-pin-for-input -// http://thetoivonen.blogspot.com/2015/12/fixing-pin-p5-or-6-on-digispark-clones.html - -// NOTE: I tested it when make triggering on HIGH without using a pullup resistor and it works. Need to set -// the pin to LOW in setup() though. No need to read LOW from that pin anymore and no resistor required... \o/ -// I need to evaluate this pulldown-/up stuff a little more. -#include "DigiKeyboard.h" - -// The button pin -#define BUTTON_PIN 1 -// The pause after last button press before executing a command -#define PAUSE 2000 - -// Local variables -unsigned long last; -unsigned int count; - -// The list of available passwords -// The number and overall lenght of passwords depends -// because the memory of the digispark is very limited... -// I recommend to use a prefix you easily can remember -// for the password/passwords to make the passwords -// on the passkey unusable for others in case you've lost -// your passkey. E.g.: WhatAWonderfulWorld -> then press the button. -const char *passwords[] = { - // passwords[0] - "n0Emb871NAQPSIqBoldh8R7UDaNhncF7Pt60Amdo6GWdTdAPwVBi2A3KU8x8DTCRo6GWdTdXNn2wLh3SUbxVWQvFDVPtatDg", - // passwords[1] - "oaxt6e3lSgflOuJ3C6Q6sUb5gvmvI5IEPFku5fqcbxJljBOUblHIT121wCu", - // passwords[2] - "jUgKGBtiJ0iNN1Ok9vejrXNn2wLh3SUbxVWQvFDVPtat0OxJlKU8x8DTCRo6GWdTdAPwVBi2A3KUrTKQwjUgK", - // passwords[3] - "G57dFnXsPUnRq1eC1CjrGxpCjuiJFlDti54W6wBS9Ro6GWdTdAPwVBi2A3KU8x8KGBtiJ0iNN1Ok9vejrXNn2wLhH" -}; - -void setup() { - // Set button pin to be INPUT. - pinMode(BUTTON_PIN, INPUT_PULLUP); - // Set BUTTON_PIN pin to LOW because the button is connected - // to VCC when pressed and will go HIGH. - digitalWrite(BUTTON_PIN, LOW); - // Initialize HID - DigiKeyboard.delay(0); - DigiKeyboard.sendKeyStroke(0); -} - -void loop() { - // Read button state - if (digitalRead(BUTTON_PIN) == HIGH) { - // Button is pressed; increment count. - count++; - // Wait until button is released - while (digitalRead(BUTTON_PIN) == HIGH) { - delay(1); - } - // Set the last press timestamp - last = millis(); - } - // Wait PAUSE time before executing a command - if (count > 0 && (millis() - last) >= PAUSE) { - // The switch case is the number of button presses - switch (count) { - case 1: - DigiKeyboard.println(passwords[0]); - break; - case 2: - DigiKeyboard.println(passwords[1]); - break; - case 3: - DigiKeyboard.println(passwords[2]); - break; - case 5: - // You can use print instead of println if you don't want - // to hit enter automatically after inserting the password - DigiKeyboard.print(passwords[3]); - break; - default: - break; - } - // Reset the counter - count = 0; - } -}