xtc/docs/PROJECT_FORMAT.md

# Project format v5 (reads v1/v2/v3/v4)

Phases 5–15 use a bounded text format implemented in C99 without a parser library.
The extension is `.xtc`. File operations run exclusively on the control thread.
The project owns its graph, tracks and silent/audio arrangement regions. Audio samples remain in external WAV
files; MIDI notes are stored inline.

## Schema

Records occur in this exact order, separated by LF, including the final record.
Fields use ASCII spaces. Integers are unsigned decimal, without signs.
Counts determine the number of subsequent records:

```text
XTC_PROJECT 5
APP 0 1 0
TEMPO 120000
IDS 1 1
GRAPH 1 2 2 1
NODE 0 1 3e800000
NODE 1 4 00000000
EDGE 0 1
TRACKS 1
TRACK 0 547261636b
MIX 3f800000 00000000 0 0
CLIPS 1
CLIP 0 0 3840 2880 960 3840 526567696f6e
ASSET -
MIDI 0
NOTES 0 0
AUTOMATION 0
END
```

- `APP`: producer major/minor/patch; informational, never executed.
- `TEMPO`: constant milli-BPM (20000..300000, default 120000), fixed 4/4.
- `IDS`: next track ID and next clip ID. IDs are uint64, monotonic and never
  reused; UINT64_MAX is reserved. Track and clip ID namespaces are separate.
- `GRAPH`: output-node policy (0/1), next node ID, node count, edge count.
  Nodes retain stable IDs (limited to the host's size_t range). No pointers or
  compiled state are serialized.
- `NODE`: ID, type (1 gain, 2 oscillator, 3 meter, 4 output, 5 audio source, 6 instrument, 8 LADSPA plugin), and exactly eight
  hexadecimal digits encoding the IEEE binary32 parameter bits, independent
  of locale and host byte order. Nonfinite values are rejected.
- `EDGE`: source and destination node IDs. Port directions are implied
  by node type; endpoints, duplicates and cycles are validated by the graph API.
- `TRACK`: ID and hex-encoded name bytes. In v4/v5 each is immediately followed
  by `MIX gain_bits pan_bits mute solo`: finite binary32 gain 0..4, pan -1..1
  encoded as eight hex digits, mute and solo unsigned 0/1.
- `CLIP`: ID, track ID, start tick, length tick, source offset tick, source
  length tick, hex-encoded name bytes. Trimming
  preserves source bounds, so a region can re-extend only within its original
  length. Overlaps are allowed and audio clips mix through the audio source node.
- `ASSET`: required after each CLIP in v2/v3/v4/v5; "-" means no audio asset, otherwise
  hex-encoded absolute path bytes, <=511 bytes after decoding, no embedded NUL
  or ASCII control characters. Each clip directly references a WAV; no sample
  data, pointers or DSP state are embedded. Paths can contain spaces.
- `MIDI`: required after each ASSET in v3/v4/v5; 0 for silent/audio regions, 1 for
  MIDI clips. MIDI clips must have no asset.
- `NOTES`: next stable note ID and global note count, followed by that many
  `NOTE id clip_id start_tick length_tick pitch velocity channel` records.
  Notes reference MIDI clips; start/length are source-relative, positive length
  within source bounds. Pitch is 0..127, velocity 1..127, channel 0..15.
  Note IDs are unique, monotonic uint64 IDs with UINT64_MAX reserved.
- `AUTOMATION`: global point count, after the last NOTE and before END in v4/v5.
  Follow with `POINT track_id parameter tick value_bits` for each point.
  Parameter 0 is gain (0..4), 1 pan (-1..1); values use finite binary32 hex.
  Track must exist; tick <= MAX_TICK; duplicate track/parameter/tick is invalid.
  Record order is preserved; rendering sorts a separate prepared copy.
- Names decode to nonempty valid UTF-8 of at most 63 bytes; ASCII control
  characters and embedded NULs are forbidden. Hex avoids quoting ambiguity.

Ticks use 960 per quarter note, 3840 per bar. All region endpoints are bounded
by 38400000 ticks (10000 bars). Limits: 64 tracks, 1024 clips, 64 graph nodes,
4096 edges, 4096 notes, 1024 automation points, 4 MiB input, 1535 bytes per record, 12 tokens per record. The reader
rejects invalid references, duplicate IDs, inconsistent next IDs, ranges,
truncated records, raw control/non-ASCII bytes, and trailing data.

Unsupported format versions return UNSUPPORTED. Other malformed data returns
FORMAT. The reader explicitly accepts v1 records without ASSET lines, with
node types 1..4, migrating their clips to empty asset paths. Version 2 accepts
node types 1..5 and ASSET records. Both migrate to MIDI=0 and no notes.
Version 3 accepts instrument nodes and MIDI/NOTES records. Versions 1–3 migrate
all tracks to unity gain, centered pan, mute/solo off and no automation.
Saving always writes v5. Unknown versions are rejected without replacing the destination; older
applications cannot read v5. Migration and maximum-path roundtrips are tested.

## Ownership and failures

Load builds and validates a separate candidate, closes the input, then replaces
the destination. Any failure retains the complete previous project. Saving
validates the project, creates a mode-0600 temporary in the destination
directory, writes, flushes, fsyncs, closes and renames over the destination.
Failures before rename retain the previous destination and remove the temporary.
The parent directory is not fsynced: survival of the rename through sudden power
loss is not guaranteed. Save replaces symlinks themselves and does not preserve
existing file permissions. POSIX I/O is private to the Linux-first persistence
module; public headers contain no POSIX types.

Saved data reproduces the arrangement, graph, track mix and automation, including
ID allocation state. Undo history is not saved. See MIXER.md for pan/interpolation.
Graph node positions, timeline zoom/scroll/selection, transport position and DSP
oscillator phase are GUI/session state and are not saved. Asset references are
external absolute paths, not copied on Save As. Metadata loading preserves
missing references; audio-plan preparation reports unreadable/invalid assets
and renders them silently. Relinking replaces a selected clip's path without
changing its IDs or arrangement. See AUDIO_FILES.md for recovery and limitations.

## Phase 9 extension and recovery policy

Phase 9 kept format v4. Native processor descriptors are process-local and have no
serialized representation; saving a native graph returns UNSUPPORTED and retains
the existing destination. Unknown file versions/types remain rejected. See
NATIVE_API.md for the extension boundary and RECOVERY.md for write-failure, killed
writer and unfinished-recording behavior. Metadata validation is available via
`xtc-check --validate PROJECT` without a GUI or server; it does not load assets.

## Phase 15: version 5 plugin metadata

The writer now emits `XTC_PROJECT 5`; versions 1–4 still load. All v4 records and
order remain the same. Node type 8 is a LADSPA plugin; native pointer-bearing type
7 is still unsupported in files. Immediately after each type-8 `NODE id 8
00000000` record come:

```text
PLUGIN unique_id descriptor_index mono_inputs control_count hex_label
MODULE hex_absolute_module_path
CONTROL port_index float32_hex_bits
```

There are exactly `control_count` CONTROL records. Label length is 1–63 bytes,
module path 1–511 bytes (absolute), both hex-encoded with no embedded NUL. Index
is <1024, mono_inputs 0/1, controls <=16, control port indices <64 strictly
increasing, and values finite. Unique ID fits uint32. The one output is implicit.
Structural validation never opens libraries. On graph compilation the host checks
identity, layout, input control port IDs and rate-adjusted legal ranges against
the module. Unknown nodes/versions fail without mutating the current project.
Missing modules remain preserved by metadata load/save; GUI installation rejects
them with a repair message. No transient DSP state, pointer or plugin binary is
stored. See PLUGIN_HOSTING.md and decision 0009 for supported processors/limits.