hanez/arduino
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

lot of cleanups

Browse source
This commit is contained in:
Johannes Findeisen 2015-08-26 01:39:01 +02:00
commit a3571ceb42
3 changed files with 22 additions and 57 deletions
Download patch file Download diff file Expand all files Collapse all files

61
BH1750_serial/BH1750_serial.ino
View file

@ -1,68 +1,21 @@
/*
This is a simple code to test BH1750FVI Light senosr
communicate using I2C Protocol
this library enable 2 slave device address
Main address 0x23
secondary address 0x5C
connect this sensor as following :
VCC >>> 3.3V
SDA >>> A4
SCL >>> A5
addr >> A3
Gnd >>>Gnd
Written By : Mohannad Rawashdeh
*/
// First define the library :
// Written 2015 by Johannes Findeisen <you@hanez.org>
#include <Wire.h>
#include <BH1750FVI.h>
BH1750FVI LightSensor;
void setup() { // put your setup code here, to run once:
Serial.begin(9600);
void setup() {
Serial.begin(9600);
LightSensor.begin();
/*
Set the address for this sensor
you can use 2 different address
Device_Address_H "0x5C"
Device_Address_L "0x23"
you must connect Addr pin to A3 .
*/
LightSensor.SetAddress(Device_Address_L);//Address 0x5C
// To adjust the slave on other address , uncomment this line
// lightMeter.SetAddress(Device_Address_L); //Address 0x5C
//-----------------------------------------------
/*
set the Working Mode for this sensor
Select the following Mode:
Continuous_H_resolution_Mode
Continuous_H_resolution_Mode2
Continuous_L_resolution_Mode
OneTime_H_resolution_Mode
OneTime_H_resolution_Mode2
OneTime_L_resolution_Mode
The data sheet recommanded To use Continuous_H_resolution_Mode
*/
LightSensor.SetAddress(Device_Address_L);
LightSensor.SetMode(Continuous_H_resolution_Mode);
Serial.println("Running...");
}
void loop() {
// put your main code here, to run repeatedly:
uint16_t lux = LightSensor.GetLightIntensity();// Get Lux value
Serial.print("LightX: ");
uint16_t lux = LightSensor.GetLightIntensity(); // Get Lux value
Serial.print("Light: ");
Serial.print(lux);
Serial.println(" lux");
delay(250);
delay(1000);
}