# tuxrecord

Record audio to a WAV file on **Linux** using **ALSA** as the recording source.

`tuxrecord` is the Linux port of the former macOS-only **macrecord** tool. The
Swift/AVFoundation code was rewritten in **C99** and now uses the native ALSA
capture API (`libasound`); it builds with **GCC**.
macrecord was created by my good friend Armin. You can find his code here:
[https://codeberg.org/armin/macrecord](https://codeberg.org/armin/macrecord)

## Requirements

- GCC and GNU make
- ALSA development headers (`libasound2-dev` on Debian/Ubuntu,
  `alsa-lib-devel` on Fedora, `alsa-lib` on Arch)

## Usage

```bash
# Record until q or Ctrl+C
tuxrecord

# Record for N seconds
tuxrecord -d 30

# Specify output directory
tuxrecord -o /path/to/dir

# Use a custom filename prefix
tuxrecord -p myrec

# Use a specific ALSA capture device
tuxrecord -D hw:1,0

# Record from PipeWire (the PipeWire sound server)
tuxrecord -D pipewire
```

## Options

| Option         | Description                                              |
| -------------- | -------------------------------------------------------- |
| `-o <dir>`     | Output directory (default: current directory)            |
| `-d <secs>`    | Stop automatically after `<secs>` seconds                |
| `-p <prefix>`  | Filename prefix instead of `tuxrecord`                   |
| `-D <device>`  | ALSA capture device (default: `default`; `pipewire` on PipeWire systems) |
| `-h, --help`   | Show help                                                |

Run `arecord -l` to list available ALSA capture devices. On systems with
PipeWire, list the PipeWire source nodes with `pactl list short sources`
or `wpctl status` (see "Recording from PipeWire" below).

## Controls

- **q** - Stop recording and save the file
- **Ctrl+C** - Stop recording and save the file

The file is written as `<prefix>__<timestamp>.wav` (default prefix
`tuxrecord`). The VU meter shows the input level of the left and right channels
in real time when stderr is a terminal.

## Recording system audio

The default ALSA capture device (`default`) is usually the microphone. To
record **system audio** (everything playing on the machine), route playback
through the ALSA loopback driver `snd-aloop` and capture from the other side
of the loop.

```bash
# 1. Load the loopback module (once per boot)
sudo modprobe snd-aloop

# 2. Play audio on the "playback" side of the loop
aplay -D hw:Loopback,0 song.wav

# 3. In another terminal, record from the paired "capture" side
tuxrecord -D hw:Loopback,1
```

Audio written to `hw:Loopback,0` (playback) is heard on `hw:Loopback,1`
(capture): the two subdevices form a loop and the samples pass straight
through. Point your players at `hw:Loopback,0` (default sink) and record from
`hw:Loopback,1` to capture the system mix. Subdevice pairing depends on the
kernel version; if one direction is silent, try recording from
`hw:Loopback,0` while playing to `hw:Loopback,1`.

## Recording from PipeWire

On modern distributions (Fedora 34+, Ubuntu 22.04+, Arch Linux) the **PipeWire**
sound server takes over audio handling. PipeWire ships an ALSA compatibility
plugin (`pipewire-alsa`) that exposes the server as a normal ALSA capture
device named `pipewire`, so `tuxrecord` can record from it with no extra
setup:

```bash
# Record from PipeWire's default source (usually the microphone)
tuxrecord -D pipewire

# Record a fixed duration
tuxrecord -D pipewire -d 10
```

### What "pipewire" records

The pipewire-alsa plugin routes capture to PipeWire's **default source**:

```bash
# Show the current default source
pactl get-default-source   # or: wpctl status

# List all available PipeWire sources
wpctl status
pactl list short sources
```

### Recording system audio (what you hear)

To capture everything that is currently playing (system audio), point the
default source at the **monitor** of the default sink. This is the PipeWire
equivalent of the ALSA loopback approach above but needs no kernel module:

```bash
# 1. Find the monitor of the default sink
pactl set-default-source "$(pactl get-default-sink).monitor"

# 2. Record it with tuxrecord
tuxrecord -D pipewire
```

The `.monitor` source carries exactly what the sink is playing, so anything
your players output ends up in the WAV file. Every capture follows the same
`<prefix>__<timestamp>.wav` naming and can be stopped with `q` or **Ctrl+C**.
The default setting can be restored later with
`pactl set-default-source <your-input-source>`.

### Troubleshooting

- **"cannot open ALSA capture device 'pipewire'"** — the `pipewire-alsa`
  plugin is missing. Install it (e.g. `pipewire-alsa` on Debian/Ubuntu/Arch,
  `pipewire-alsa` on Fedora), or the PipeWire server is not running
  (`systemctl --user status pipewire`). In that case fall back to a regular
  ALSA device with `tuxrecord -D hw:0,0`.
- Recording from a specific device or virtual node instead of the default
  source is possible by setting the default source first (see `pactl` /
  `wpctl` output) or by creating a loopback with `pw-loopback` and recording
  that node.

## Build

```bash
make
# or directly:
# gcc -std=c99 -O2 -Wall -Wextra tuxrecord.c -o tuxrecord $(pkg-config --libs alsa) -lm
```

Install (installs to `$(PREFIX)/bin`, default `/usr/local/bin`):

```bash
sudo make install
# or: sudo cp tuxrecord /usr/local/bin/tuxrecord
```

Install to a custom prefix:

```bash
make install PREFIX=~/.local
```

Uninstall:

```bash
sudo make uninstall
```

## License

Apache License 2.0 — see the LICENSE file for details.

Copyright 2026 Johannes Findeisen