diff --git a/Digispark_Passkey/Digispark_Passkey.ino b/Digispark_Passkey/Digispark_Passkey.ino
index df0bb9d..121ecac 100644
--- a/Digispark_Passkey/Digispark_Passkey.ino
+++ b/Digispark_Passkey/Digispark_Passkey.ino
@@ -16,11 +16,14 @@ unsigned int count;
 Blinker blinker(LED_PIN);
 
 // the list of available passwords
+// the number and overall lenght of passwords depends because the memory of the digispark is very limited...
+// i recommend to use a prefix you easily can remember for the password/passwords to make the passwords
+// on the passkey unusable for others if you have lost your passkey. E.g.: WhatAWonderfulWorld -> then press the button.
 const char *passwords[] = {
-  "PASSWORD1", 
-  "PASSWORD2",
-  "PASSWORD3",
-  "PASSWORD4"
+  "n0Emb871NAQPSIqBoldh8R7UDaNhncF7Pt60Amdo6GWdTdAPwVBi2A3KU8x8DTCRo6GWdTdXNn2wLh3SUbxVWQvFDVPtatDg", // passwords[0]
+  "oaxt6e3lSgflOuJ3C6Q6sUb5gvmvI5IEPFku5fqcbxJljBOUblHIT121wCu", // passwords[1]
+  "jUgKGBtiJ0iNN1Ok9vejrXNn2wLh3SUbxVWQvFDVPtat0OxJlKU8x8DTCRo6GWdTdAPwVBi2A3KUrTKQwjUgK", // passwords[2]
+  "G57dFnXsPUnRq1eC1CjrGxpCjuiJFlDti54W6wBS9Ro6GWdTdAPwVBi2A3KU8x8KGBtiJ0iNN1Ok9vejrXNn2wLhH" // etc...
 };
 
 void setup() {
@@ -28,19 +31,19 @@ void setup() {
   pinMode(BUTTON_PIN, INPUT);
   digitalWrite(BUTTON_PIN, HIGH);
 
+  // set blink effect (ON, OFF) in milliseconds
+  blinker.setDelay(25, 10000);
+  blinker.start();
+
+  // initialize HID
+  DigiKeyboard.delay(0);
+  DigiKeyboard.sendKeyStroke(0);
+
   // light up the LED for a second to show that passkey is ready
   pinMode(LED_PIN, OUTPUT);
   digitalWrite(LED_PIN, HIGH);
   delay(1000);
   digitalWrite(LED_PIN, LOW);
-
-  // set blink effect (ON, OFF) in milliseconds
-  blinker.setDelay(25, 10000);
-  blinker.start();
-  
-  // initialize HID
-  DigiKeyboard.delay(0);
-  DigiKeyboard.sendKeyStroke(0);
 }
 
 void loop() {
@@ -53,7 +56,7 @@ void loop() {
     last = millis();
     count++;
     // wait until button is released
-    while(digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(BUTTON_PIN) == LOW) {
       delay(1);
     }
   }
@@ -61,7 +64,7 @@ void loop() {
   // wait PAUSE time before executing a command
   if (count > 0 && (millis() - last) >= PAUSE) {
     // the switch case is the number of button presses
-    switch(count) {
+    switch (count) {
       case 1:
         DigiKeyboard.println(passwords[0]);
         break;
@@ -72,7 +75,9 @@ void loop() {
         DigiKeyboard.println(passwords[2]);
         break;
       case 5:
-        DigiKeyboard.println(passwords[3]);
+        // you can use print instead of println if you don't want to
+        // hit enter automatically after inserting the password
+        DigiKeyboard.print(passwords[3]);
         break;
       default:
         break;